The best metal roofing company in Miami, and one of the few that makes the panels it installs under its own Miami-Dade NOAs. Intertek-tested to 307 psf.
We make the metal panels for your roof in our Miami facility, then our own crews install them. No middleman and no waiting weeks on a supplier. RoofingEX has completed more than 1,800 roofs across South Florida, including 700+ permitted projects in Miami-Dade.
Standing seam, nail strip and PBR panels in 24 or 26 gauge, any color, usually roll-formed within 24–48 hours. Once the permit and materials are in, most roofs are finished in about two weeks, and you pay $0 deposit.
Miami-Dade County, Florida NOA 22-1208.01, exp. 04/13/2028 (REM 1.5 standing seam). Miami-Dade County, Florida NOA 26-0701.06 through 26-0701.12, exp. 08/27/2031 (Series 1300 and 2000 standing seam panels). Intertek also tested the REM 1.5 for wind-driven rain (TAS 100) and water penetration (ASTM E2140). Florida license CCC1331656 · BBB A+.
Metal roofing systems are designed to meet Florida code requirements and resist uplift forces that cause traditional roofs to fail during severe storms.
Metal roofing reflects solar exposure and supports proper airflow, helping reduce interior heat buildup and long-term strain on cooling systems.
Materials are selected to withstand coastal air, constant moisture, and high humidity without rapid corrosion or material breakdown.
Metal roofs are built to last decades with minimal maintenance, reducing repair cycles, downtime, and replacement costs over time.
Florida homes face wind, moisture, and heat year-round. Our residential metal roofing systems are installed with proper fastening, drainage, and material selection to meet Florida building requirements and perform reliably over time.
Florida commercial properties face constant exposure to wind, heat, and moisture. Our metal roofing systems are installed to support structural demands, limit disruptions, and meet Florida building requirements for long-term commercial performance.
| Profile | Best for | Gauge |
|---|---|---|
| Standing seam (REM 1.5, Series 1300 and 2000) | Homes; hidden fasteners and the cleanest look | 24 / 26 |
| Nail strip | Homes; lower cost than mechanical seam | 24 / 26 |
| PBR | Commercial buildings, warehouses and outbuildings | 24 / 26 |
| Copper | High-end homes and accents | — |
What it costs: Standing seam metal roofs in Miami typically run $12–$18 per square foot installed. Your price depends on roof size, pitch, deck condition and panel choice. Get an instant estimate or read our metal roof cost guide.
$0 deposit, plus free gutters or attic insulation with every roof replacement. Financing through GoodLeap, HomeRun, Ygrene and Renew Financial.
Fully credentialed for residential and commercial work across Florida.
Roofing assemblies installed to meet Florida building and HVHZ requirements.
Experienced crews handling residential and commercial metal roofing projects.
Durable construction backed by a warranty on materials.
We assess roof structure, measurements, access points, and existing conditions to identify risks early and confirm requirements before work begins.
Metal roofing components are prepared to match the project’s specifications, ensuring proper fit, material compatibility, and efficient installation timing.
Installation is completed using approved fastening methods and detailing practices to meet Florida building codes and inspection requirements.
Typically 40 years or more with proper installation and coastal-grade coatings.
Yes. We roll-form standing seam, nail strip and PBR panels at our Miami facility and install them with our own crews.
Intertek tested our REM 1.5 panel to 307 psf of wind uplift, twice its 153.5 psf rated design pressure (Miami-Dade County, Florida NOA 22-1208.01, exp. 04/13/2028).
Aluminum resists salt air best. Galvalume steel is stronger and costs less inland. We make both.
No. $0 deposit on every job; you pay as the work progresses.
Yes. Permits and inspections are included.
Yes. Because we make the panels, we can match your profile, gauge and color. See metal roof repair.
Metal roofing guides: Standing seam guide · Metal panel options · Metal roof cost · Metal vs. shingle · Commercial metal roofing
Looking for a qualified metal roofing contractor in your area? Use the form to request an on-site evaluation and receive a clear estimate based on your property and local requirements.
We engineer dependable, high-quality roofing designed for Florida’s climate and code standards.
Premium Metal Roofing Across South Florida
Enter your name and email below to get a Free Copy of: Top 20 Things to Know Before Buying a New Roof in Florida.
Escriba su nombre y correo para recibir una copia gratis de: Las 20 Cosas que Debe Saber Antes de Comprar un Techo Nuevo en Florida.
